Friday, 27 September 2013

make this pattern


Happy Friday!  Here's a new tutorial  for you.  A few of you mentioned that you'd like learn how to make my Summer and the City dress, so I figured out a way to show you how to draft the bodice yourself.   If you do want to make this but don't have time now, you can find it later in the "Make This" section on my blog.

Here's what you'll need:

          • base pattern (download it here)
          • glue stick / tape
          • ruler
          • scissors
          • sharp pencil 
          • tracing wheel or something pointy
          • sheet of scrap paper
          • a coloured pen or pencil is useful but not necessary

We'll do this in 2 parts:

Part 1:  Moving the waist dart on the base pattern to the side seam, and making adjustments for a sleeveless garment
Part 2:   Drawing in the neckline and shoulder cap, and repeating for the bodice back.

Here we go with Part 1.  Our base pattern has a waist dart, but we want a bodice with a bust dart at the side seam.  Here's how to move it over, and make a couple more adjustments along the way. 

1)  Print out the base pattern and cut your size.  Refer to the size chart below.  I'm working on a size 10.


Here's a quick cheat sheet on some of the terminology used below.

2)  Draw a line through the centre of the waist dart and through it.  (Make you draw exactly through the centre of the dart that corresponds to the size you cut out)
3)  Placing a ruler on that line, measure 2cm up from the tip of the dart.
4)  Mark this point.  This is the actual bustpoint for the bodice pattern and referred to from here on as the dart apex.


5)  Draw the new waist dart, joining the apex of the dart to the bottom of the dart legs for your size.  


6)  At the bodice side seam, measure 10 cm down from the arm scye and mark.
7)  Draw a line from this point to the dart apex
8)  Using scissors, cut or "slash" the left leg of the waist dart to - but not through - the dart apex.
9)  Now do the same along the newly drawn line from the side seam to the dart apex:  slash to but but not through the apex.

10) Now you have a moveable lower left corner of the bodice.  Close the waist dart by moving the left leg of the waist dart to the right leg and glue or tape securely.  This will open up the bust dart.

11)  On the pattern you've downloaded, you'll notice some small circles on the arm scye.  These represent the arm scye dart.  (I am working from a different print out and have marked these points with my pencil above.)  Draw a line from the two circles on the arm scye on your size to the dart apex.
12) Slash the lower dart leg along the line you drew, to the dart apex
13) Close the dart by moving the lower and upper dart leg together and glueing or taping the overlap in place
14) Clip away the small excess


You now have a very wide bust dart on the side seam, and you've closed the waist dart and the arm scye dart.
15) Glue or tape the new bust dart onto a piece of paper.

16)  Now we want the bottom leg to meet the top leg of the bust dart.  Make a clean fold along the lower dart leg to the dart apex, as best as possible.  Press down along the side seam so that the layers of paper are neatly folded, and the lower and upper dart legs meet each other neatly. Using a tracing wheel or something pointy (I'm using my pivot tool) punch through the three layers of paper lightly, along the side seam line.
17)  Connnect the punched dots with a pencil.
18)  Trim away the excess paper.

19)  Draw a line through the centre of the bust dart to the apex. Mark a notch 2cm down that line, to the left of the apex.  This is the new bust dart point.
20)  Draw in the legs of the bust dart by connecting the new bust dart point to the end of the original dart legs.

We have to make an adjustment for the V-neck. (If you do not want to add a V-neck, do not include this step)  
21)  Measure in one centimetre from the centre front at the neckline and mark.  Draw a long line from this point down the front of the to where the centre front meets the waist, or "zero".  Trim along this line.
22)  Draw in a new grainline parallel to the centre front.


We're nearly there - we've moved the waist dart, adjusted for the sleeveless bodice and lower neckline.  

Click here for Part 2 - How to draw in the neckline and the cap sleeve, and how to repeat this on the bodice back.

12 comments:

  1. Ohhh, Thank You!! I do so love a pictorial tutorial, especially one so informative and visual with red highlights! Much appreciated Elise, I can't wait for post 2 ;)

    ReplyDelete
    Replies
    1. You're welcome! I hope you have fun making it!

      Delete
  2. Whoohoo thank you! Will have to make this one!

    ReplyDelete
    Replies
    1. Great to hear Nat, I hope you like!

      Delete
  3. The dress is so cute, what fabric did you use?

    ReplyDelete
    Replies
    1. Thank Zoe! It's a heavy cotton sateen I bought in Germany but I also spotted it here at Truro Fabrics: http://www.trurofabrics.com//cotton-sateen-fabric-abstract-zig-zag-multi.html

      Delete
  4. WOW thank you! I have downloaded the pattern, now I have to find time to make the changes! ha, ha, ha!

    ReplyDelete
  5. Hi,

    Im trying to download the pattern but do not work. Have you another link? Thank you very much!

    Debbie
    http://debbiepatch.blogspot.com

    ReplyDelete
    Replies
    1. Hi Debbie, have you tried clearing the cookies on your computer? Or downloading Google Chrome? If neither of these helps drop me an email and ill forward it to you.

      Delete
  6. Perfect dress! Fabric is so beautiful!

    ReplyDelete